ORDERS OVER 99 SHIP FREE! SEE DETAILS
×

07-16 Jeep Wrangler Unlimited JK 4WD 4-inch Suspension Lift System

Rough Country
Many in stock
$549.95
  • 4-inch Suspension Lift System
  • 100% Bolt-on installation
  • Increased ground clearance
  • Coil correction plates correct the rear coil angle 10 degrees and allow the rear coil springs to function more effeciently
  • Premium Performance 2.2 series shocks
  • Unique coil springs for 4-door and 2-door models
  • MPN: 681S
  • Warranty: Limited Lifetime
  • Fits 4-Door models only; 2012 and newer models require exhaust modification to clear front drive shaft (#1030); On Automatic equipped vehicles, during heavy articulation, it may be possible for the front drive shaft to come in contact with the automatic transmission pan. If this is occurs, replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front drive shaft (07-11: #5096.1 12-14: #5071.1)

07-16 Jeep Wrangler Unlimited JK 4WD 4-inch Suspension Lift System

4-inch Suspension Lift System

Kit Contents

Rough Country's 4-inch Suspension Lift System - 681S

Front: Lifted coil springs, track bar bracket, pitman arm, sway bar links, cam bolts, lower shock relocation brackets, brake line brackets, and hardware; Rear: Lifted coils springs, track bar drop bracket, coil correction plates, cam bolts, brake line relocation brackets, and hardware; Shocks: (4) Performance 2.2 Shocks

100% Bolt-on installation

  • Increased ground clearance
  • Coil correction plates correct the rear coil angle 10 degrees and allow the rear coil springs to function more effeciently
  • Premium Performance 2.2 series shocks
  • Unique coil springs for 4-door and 2-door models

    Manufacturer: Rough Country Suspension Systems; Part Number: 681S; Weight (Lbs): 98.08; Install Time (Hours): 4-5; Wheel Backspacing (Inches): 4.5-4.75; Recommended Tire Size: 35-by-12.50


    Application Notes:

    Fits 4-Door models only; 2012 and newer models require exhaust modification to clear front drive shaft (#1030); On Automatic equipped vehicles, during heavy articulation, it may be possible for the front drive shaft to come in contact with the automatic transmission pan. If this is occurs, replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front drive shaft (07-11: #5096.1 12-14: #5071.1)

  • Additional Information

    MPN 681S

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Your cart

    ×