Axle Assembly

Items 1 to 20 of 25 total

  • G2 Core 44 Front Axle Assembly W/Caster 4.88 W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK High Pinion Front with 4.88 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • 3 Degrees extra axle caster for 6in. and up lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,859.99
  • G2 Core 44 Front Axle Assembly W/Caster 4.88 W/Auburn Ected 07-Pres Wrangler JK G2
    • JK High Pinion Front with 4.88 gear ratio and Auburn Ected
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • 3 Degrees extra axle caster for 6in. and up lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,643.99
  • G2 Core 44 Front Axle Assembly W/Caster 5.13 W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK High Pinion Front with 5.13 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • 3 Degrees extra axle caster for 6in. and up lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,859.99
  • G2 Core 44 Front Axle Assembly W/Caster 5.13 W/Auburn Ected 07-Pres Wrangler JK G2
    • JK High Pinion Front with 5.13 gear ratio and Auburn Ected
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • 3 Degrees extra axle caster for 6in. and up lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,643.99
  • G2 Core 44 Front Axle Assembly W/Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • 3 Degrees extra axle caster for 6in. and up lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,859.99
  • G2 Core 44 Front Axle Assembly W/Caster 5.38 W/Auburn Ected 07-Pres Wrangler JK G2
    • JK High Pinion Front with 5.38 gear ratio and Auburn Ected
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • 3Degrees extra axle caster for 6in. and up lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,643.99
  • G2 Core 44 Front Axle Assembly No Caster 4.56 W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK High Pinion Front with 4.56 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • Standard axle caster for 0-4 inch lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,859.99
  • G2 Core 44 Front Axle Assembly No Caster 4.88 W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK High Pinion Front with 4.88 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • Standard axle caster for 0-4 inch lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,859.99
  • G2 Core 44 Front Axle Assembly No Caster 4.88 W/Auburn Ected 07-Pres Wrangler JK G2
    • JK High Pinion Front with 4.88 gear ratio and Auburn Ected
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • Standard axle caster for 0-4 inch lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,643.99
  • G2 Core 44 Front Axle Assembly No Caster 5.38 W/Auburn Ected 07-Pres Wrangler JK G2
    • JK High Pinion Front with 5.38 gear ratio and Auburn Ected
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
    • Heavy duty Dana Spicer 5-7166X Axle U-Joints
    • Factory style flange pinion yoke
    • Standard axle caster for 0-4 inch lifts
    • Massive forged inner C-ends
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,643.99
  • G2 Core 44 Rear 4.56 35 Spl W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK Rear with 4.56 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 35 spline Placer axle shafts
    • Factory style flange pinion yoke
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,103.99
  • G2 Metric Core 44 Rear 4.88 35 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK Rear with 4.88 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 35 spline Placer axle shafts
    • Factory style flange pinion yoke
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,103.99
  • G2 Metric Core 44 Rear 5.13 35 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK Rear with 5.13 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 35 spline Placer axle shafts
    • Factory style flange pinion yoke
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Uses metric Rubicon style carrier bearings
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $4,103.99
  • G2 Core 44 Rear 4.88 35 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2
    • JK Rear with 4.88 gear ratio and ARB Air Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • USA Made 4340 Chromalloy 35 spline Placer axle shafts
    • Factory style flange pinion yoke
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $3,995.99
  • G2 Core 44 Rear 5.13 30 Spl W/Eaton E Locker 07-Pres Wrangler JK G2
    • JK Rear with 5.13 gear ratio and Eaton E-Locker
    • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
    • 4340 Chromalloy 30 spline axle shafts
    • Factory style flange pinion yoke
    • Integrated skid plates on lower control arm mounts
    • Heavy-duty 1/4in. laser cut brackets
    • Heavy duty 3in. diameter 5/16in. DOM tubes
    • Reinforcing ribs for added strength and protection
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    $3,671.99
  • Rock Jock Dana 60 Rear Axle Assembly 4.88 Ratio 35 Spl Axels W/ARB Air Locker 07-Pres Wrangler JK G2
    • 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Axle Assembly
    • 4.88 Gear Ratio
    • ARB Air Locker
    • Currie 35 Spline Axle Shafts
    • Dual Bolt Pattern 5 on 5 and 5 on 5.5
    • Accepts Factory Brakes And Wheel Sensors
    • 1350 Series Yoke
    • Ductile Iron Housing Center Section
    • AR 400 Heat Treated Bottom Skid Plate
    • 3 inch D.O.M. Steel Tubes
    • Air compressor sold separately
    • May Require Driveshaft Modifications
    $3,699.99
  • G2 Core 44 Front 4.56 W/ARB Air Locker Wrangler TJ/LJ Cherokee XJ G2
    • Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited
    • Fits 1984 to 2001 XJ Cherokee
    • Massive forged inner C-end
    • Integrated skid plates on lower control arm mount
    • Heavy-duty 1/4 Inch laser cut brackets
    • Heavy duty 3 Inch diameter 5/16 Inch DOM tubes
    • Reinforcing ribs for added strength and protection
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    • Utilizes new generation JK 44 ring & pinion
    • Gear Ratio: 4.56
    • Locker: ARB Air Locker
    • SAE Bearings
    • 30 Spline G2 Chromoly Axles
    $4,171.99
  • G2 Core 44 Front 5.13 W/ARB Air Locker Wrangler TJ/LJ Cherokee XJ G2
    • Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited
    • Fits 1984 to 2001 XJ Cherokee
    • Massive forged inner C-end
    • Integrated skid plates on lower control arm mount
    • Heavy-duty 1/4 Inch laser cut brackets
    • Heavy duty 3 Inch diameter 5/16 Inch DOM tubes
    • Reinforcing ribs for added strength and protection
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    • Utilizes new generation JK 44 ring & pinion
    • Gear Ratio: 5.13
    • Locker: ARB Air Locker
    • SAE Bearings
    • 30 Spline G2 Chromoly Axles
    $4,171.99
  • G2 Core 44 Front 5.13 W/Auburn Ected Wrangler TJ/LJ Cherokee XJ G2
    • Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited
    • Fits 1984 to 2001 XJ Cherokee
    • Massive forged inner C-end
    • Integrated skid plates on lower control arm mount
    • Heavy-duty 1/4 Inch laser cut brackets
    • Heavy duty 3 Inch diameter 5/16 Inch DOM tubes
    • Reinforcing ribs for added strength and protection
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    • Utilizes new generation JK 44 ring & pinion
    • Gear Ratio: 5.13
    • Locker: Auburn Ected
    • SAE Bearings
    • 30 Spline G2 Chromoly Axles
    $4,205.99
  • G2 Core 44 Rear 4.56 35 Spl W/ARB Air Locker 97-06 Wrangler TJ/LJ G2
    • Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited
    • Integrated skid plates on lower control arm mount
    • Heavy-duty 1/4 Inch laser cut brackets
    • Heavy duty 3 Inch diameter 5/16 Inch DOM tubes
    • Reinforcing ribs for added strength and protection
    • Heavy duty forged bearing caps
    • Spanner nuts for backlash adjustment
    • Heat-treated aluminum diff cover with cooling fins
    • Utilizes new generation JK 44 ring & pinion
    • Gear Ratio: 4.56
    • Locker: ARB Air Locker
    • SAE Bearings
    • 35 Spline G2 Chromoly Axles
    $3,912.99
Page:
  1. 1
  2. 2